HT309 is digital light meters used to measure illuminance up to 20kLux (HT307) and 400kLux
(HT309) through a silicon photodiode sensor.
Model HT309 also allows measuring illuminance of LED sources with various colours by setting the
relevant correction factors, further to measuring luminous intensity (expressed in Candles).
Measuring range: 0.01÷400klux 0.01÷40kFc
HTA102 is a digital sound level meter capable of carrying out standard control tests on
environmental noises, sound levels, noise pollution etc…
It permits to effect recordings of sound pressure level (SLP) with selectable sampling
intervals.
HTA102 is fitted with USB output for PC connection and SoundLink software supplied as
standard accessory.
A real time recording (Data Logger) can be realized displaying results in the form of graphs and
saving data under text format.l
HTA102 is provided with a portable calibrator to carry out preliminary checks and packed
inside a carryng case along with all measurement accessories.
Noise measurement resolution: 0,1 dB
Noise measuring range: from 30 dB to 130 dB
Measurement of sound pressure level (SPL): Auto 30/130, Hi 80/130, Med 50/100
Internal memory for data saving: 32.700 recordings
HTA105 was designed for air speed measurement with selection of European or Anglo-Saxon
measuring units.
The hot wire anemometer carries out measurements using an extensible telescopic probe capable of
taking also measurements of temperature and humidity thanks to its built-in sensors.
Additional functions include measurement of air volumetric flow rate (CMM and CFM parameters) as
well as calculation of average values in space and time. HTA105 is fitted with MAX/MIN and Data
HOLD function in addition to an internal memory to store air speed measuring results.
It is provided with a back-lighted double display and auto power off to save internal battery
life.
Measurement of wind speed in m/s: en m/s ; Km/h ; ft/min ; MPH ; knots
Air temperature/humidity measurement with in-built sensor: from 0,0°C to 50,0°C
Measurement of air relative humidity in %RH: from 0% RH to 100% RH
Power supply: 1 x 9V IEC6F22
HTA107 allows the measurement of material moisture with a contact probe and a penetration probe.
This tool also allows for performing infrared temperature measurements and calculating the
temperature differential to establish condensation situations on surfaces. It is equipped with a
display backlight to make readings easier in poorly lit environments.
Infrared temperature measurement: -50°C ÷ 200°C / 58°F ÷ 392°F
Distance / infrared spot ratio: D:S = 8:1
Measurement of air temperature: -28°C ÷ 77°C / 20°F ÷ 170°F
Internal memory for measured data saving: Max 20
HTA103 is a mobile compact digital thermometer, the ideal solution for each temperature
measurement with contact, inside liquids or in air with use of K-type or J-type probes directly
connected to the input through a standard connector.
This device allows measuring temperature both in °C and in °F, it is provided with a wide
display for easy reading, it is provided with HOLD function, MAX/MIN, relative measurement and
can be used in private and industrial environments for many applications.
Selection of measuring unit: °C / °F / °K
Temperature measuring range with K-type probe: -250 ÷ 1372°C -418 ÷ 2502°F
Temperature measuring range with J-type probe: -200 ÷ 1000°C -328 ÷ 1832°F
Temperature measuring range with T-type probe: -250 ÷ 400°C -418 ÷ 752°F
Comfortable and extremely practical system for reading temperature with laser system as well as provide sound and visual indications whenever the measured value changes. It was designed for those who want to carry out very fast measurements and detect temperature variations without wasting time.
Comfortable and extremely practical instrument to read infrared temperature with laser system providing visual and sound indications every time the measured value changes. HT3305 also allows to perform temperature measurements with a type K probe, it is designed for those who need to perform very fast measurements and to detect, without loss of time, temperature variations
HTA103 is a mobile compact digital thermometer, the ideal solution for each temperature measurement with contact, inside liquids or in air with use of K-type or J-type probes directly connected to the input through a standard connector. This device allows measuring temperature both in °C and in °F, it is provided with a wide display for easy reading, it is provided with HOLD function, MAX/MIN, relative measurement and can be used in private and industrial environments for many applications.
